Many studies have proven that constant exposure to electrical and magnetic fields, emitted by all electrical wiring in the walls, can be detrimental to our health. In our rapidly growing high-tech world the number of sources of electric and magnetic fields is constantly increasing. We must be cautious. Just like allergies often develop from over exposure to seemingly harmless substances, more of us are finding that we are becoming sensitive to electric and magnetic fields. Also, epidemiological studies have shown electric and magnetic fields are known to promote many serious degenerative diseases.
Biologists and other specialists in the field agree that we must be cautious of where we sleep. Some of the highest level electric and magnetic fields are found in our bedrooms. Wiring for downstairs lighting, upstairs receptacles, lighting and fans commonly run through the ceilings, walls and floors of our bedrooms. This wiring constantly radiates electric fields, even when everything is switched off.
The typical bedroom has bedside lamps, clock radios, electric blankets, VCR's, televisions etc... On average we spend approximately 1/3 of our life in this room. While we sleep our body grows and tries to repair itself. During this process thousands of electrical impulses are occurring in our bodies and it is crucial that we have an interference free environment for this to take place.
Currently, our beds are surrounded by a curtain of electric and magnetic fields caused by the mere presence of A/C (Alternating Current) in our wiring, even when everything is switched off. Sleep is the time when our body repairs itself. If the body is exposed to electric and magnetic radiation during this time, the immune system will be suppressed and prevent the natural repair process from occurring. EMF Safety is a concern.
Our automatic demand switches work quite simply by shutting off the electricity at the fuse box. For example, if a switch is installed on a lighting circuit in the bedroom , the switch will automatically sense when the last light on that circuit is turned off at night. At this point the automatic switch has determined there is no demand for electricity and turns off the electricity at the fuse box. Therefore there is no voltage present in the wires beyond the fuse box, eliminating electric fields on this wiring circuit. This is a simple yet 100% effective method of protection from electric fields emitted by this lighting circuit. With the demand switch installed, our cells will be able to repair themselves naturally as we sleep.
In the morning, when you awake and switch on the lights, the automatic switch senses a demand for electricity and automatically restores electricity to this circuit for normal operation. In most cases, the demand switch is the most effective way of eliminating unwanted electric fields in the bedroom.
The remote control demand switches' purpose is the same as the automatic switch except that it is a manual switch, not automatic. One physically needs to press a button on a remote control to turn off the circuit. The remote control unit is used to turn the electricity on and off at the fuse box. This can be done conveniently at bedtime without leaving the comfort of your bedroom. This is recommended primarily for use on circuits that have electronic devices that constantly require electricity to operate even, when switched off, for example, TV, stereo, clock radio and GFI (ground fault interruption) circuits. The automatic disconnection switch is not designed for these types of electronic devices or GFI circuits.